虫虫机器人的身体
我们今天办了第一个Lumi’s 虫虫机器人的工作坊
材料
- 钢丝衣架
- 9v 电池和电池盒
- 超音波距离传感器
- 舵机
- Arduino UNO
- Velcro!!!
]]>
April 24th, 2011 § 1 comment § permalink
April 18th, 2011 § 5 comments § permalink
虫虫机器人工作坊
April 13th, 2011 § 1 comment § permalink
Check out here for project updates.]]>
April 11th, 2011 § 4 comments § permalink
April 10th, 2011 § 0 comments § permalink
posted a detail article on hacking HaiPad m701!
The M701 in itself is an example of hacking in China: here, hacking hardware that wasn’t thought to be workable together to achieve something close to a device that is much more expensive is not called a hobby but a full-time job! Like many others, the extremely low-cost of this 7 inch tablet is made out of a even lower cost chipset, the Telechips 8902. The Telechips was originally designed to fit high end automotive applications, not do tablets or robotics. This chipset powers a variety of similar devices: Augen Gentouch, Coby Kyros, HSG X5A, Haipad M701, Dawa D7, SmartQ v5/v7, Coby Kyros MID7005/MID7015, Imito iM7, Smartbook Surfer (Pictures) “Shanzhai” integrators prefer to keep their supply chain discreetly low-profile as they consider it their “secret” sauce. This is because in Shenzhen, manufacturers are in a race to produce a whole bunch and sell them before the local competitors do the same, often advertising capabilities of the underlying chipset that are actually unavailable to the user since unsupported by the OS.]]>
March 31st, 2011 § 0 comments § permalink
加入! 新车间开放日 时间:2011年4月3日星期日下午2点至5点 地点:上海市长宁区安化路76号301室 (靠近江苏路) 地铁: 二、十一号线(江苏站四号出口) 有兴趣参观的朋友请报名。]]>
March 27th, 2011 § 0 comments § permalink
搞飞机(4旋翼)小组
从路边铝门窗店里面山寨的骨架到搞到现在数字车床出来的铝底座和碳纤维的骨架,感谢其晨和东光的投入!希望在未来的几个月内可以开始飞。
]]>
March 22nd, 2011 § 1 comment § permalink
“山寨”四旋翼
从新车间一开始,就有不少的朋友对做四旋翼有兴趣,我们成立了一个四旋翼小组考虑如何能用在上海买的到的零件做一台四旋翼。
第一次的尝试是很山寨的,找了一家做窗户的,切了几个50cm的铝条。不是很成功,中间的架子的设计还是蛮有挑战的。
电机当然就是上淘宝淘了,用一般航模电机。花了一些时间调通Arduino.
东光找了一个朋友设计了一个铝和碳纤的骨架,非常的酷。有了这个骨架和电机,接下来就是剩下的传感的设计,希望在未来几个月内可以飞起来。
]]>
March 21st, 2011 § 0 comments § permalink
上海的RoboPeak
非常高兴上海 RoboPeak 机器人研发团队会在 3/26的活动 上为我们带来演说。非常期待。
从他们的网站上:
RoboPeak是国内由一群软件工程师、电子工程师、新媒体艺术家所组成的机器人及相关技术领域的设计研发团队,团队于2009年底创建。 团队致力于民用机器人平台系统、机器人操作系统(ROS)以及相关设备的设计研发,并尝试将日新月异的机器人技术融入人们的日常生活与娱乐当中。同时,我们将尽力为机器人技术在开源硬件、开源软件社区的普及做出贡献。 团队在嵌入式系统、系统级软件/固件、图像识别等领域拥有丰富的经验,拥有独立设计,开发机器人操作系统、相关传感器设备硬件/固件的能力。
这个团队在机器人和Arduino上做了相当多开发,详细的情况可以查看他们的博客.底下的图片来自他们的博客,看起来相当有趣的机器人设计,期待周六和他们见面。
iPad 遥控
]]>March 15th, 2011 § 2 comments § permalink
We have the FRAME!!!
Danny show up in Barcamp with a big surprise! He show me the fiber/aluminium frame of the quadcopter he just got CNCed. What a beauty!
]]>